SMC Networks BLW-54MF - Manual (Page 10)

1
4
BLW-54MF
3. Product Housing
LEDs Status Meaning
Power On/Off When starting up BLW-54MF, the Power LED will be on.
Status
EZ-GO
Blinking
Press the EZ-GO button at the back of BLW-54MF and
enable EZ-GO function. After pressing EZ-GO button,
the LED will be blinking for 5 minutes that means GW-
US54SG can search for BLW-54MF and connect with it.
On
I f B LW- 5 4 M F h a s c o n n e c t e d w i t h G W- U S 5 4 S G
successfully, EZ-GO LED will be on all the time.
WAN On/Off/Blinking
When the connection is established between BLW-54MF
and a modem, the WAN LED will be on. And the WAN
LED will be blinking when transmitting or receiving data
via WAN port.
LAN On/Off/Blinking
When the power is on, the LAN LED will be on all the
time. If it is transmitting data, the LAN LED will be
blinking.
Wireless On/Off/Blinking
When BLW-54MF Ànds any available wireless connection,
the wireless LED will be on. And the LED will be
blinking when transmitting or receiving data via wireless
connection.
AP mode On/Off
When switch to AP mode, the AP mode LED will be on all
the time; if it has not been switched to AP mode, the LED
will be off.
ŜFront Panel