Samsung Digital Video Recorder SVR-1660C - Manual (Page 45)

Install Manual
44
Individual sensor
This option allows setting each of the 16 sensor input types individually.
(1) Select a sensor then press [Enter].
(2) Set the input type for the selected sensor.
(3) Press [ESC] to exit to the OSD menu when you are finished.
Sensor setup lets you choose whether or not to use sensors and their type, and
Record & Relay setup, while set separately, should be set according to the
sensor type. Please refer to the “Record setup”, the “Event Action” heading in
the “Event setup”, and “Relay out” sections for more information.
3.3.3.2 Relay connections & settings
Specification
The alarm specifications are as follows.
Specification
No. of outputs 4 relay outputs
Output type Dry contact
Connection method Insert stripped wire end into terminal block
Rated
current
DC 30V 1A
AC 125V 0.5A