My clié handheld keeps turning itself off, My clié handheld does not produce any sounds, The lcd display cannot be viewed properly – Sony PEG-TH55 User Manual
Page 68
68
Sony Personal Entertainment Organizer PEG-TH55 3-089-698-11 (1)
My CLIÉ handheld keeps turning itself off
B Your CLIÉ handheld is designed to turn itself off after a period of inactivity (Automatic
power-off). You can set the automatic power-off time by selecting time for [Auto-off
After:] in [General] of the Preferences screen.
Note
The maximum idle time is 3 minutes.
b
For details, refer to “Customizing your CLIÉ™ handheld (Preferences): Setting the automatic
power-off time” in the “Handbook” (PDF format).
B Did you set [After a preset delay] from [Auto Lock Handheld:] in the Security screen?
If you set [After a preset delay] from [Auto Lock Handheld:], your CLIÉ handheld may
turn off after a shorter period even if you set the automatic power-off time.
b
For details, refer to “Protecting your data with a password: Locking your CLIÉ handheld with
a password (Data protection)” in the “Handbook” (PDF format).
My CLIÉ handheld does not produce any sounds
B Is [System Sound:] in [General] of the Preferences screen set to [Off]?
b
For details, refer to “Customizing your CLIÉ™ handheld (Preferences): Setting sounds” in the
“Handbook” (PDF format).
B Adjust the volume settings in the Adjust Volume dialog box displayed by tapping
in the status bar (page 94).
Tip
If [Muting] is selected in the Adjust Volume dialog box, all sounds, including audio, are
muted.
The backlight does not turn on when I adjust the
brightness level
B If the brightness is set to the lowest level, the display may be illegible. However, this
is not a malfunction.
The LCD display cannot be viewed properly
B Depending upon the angle of vision, the brightness may be uneven, however, this is not
a malfunction. You can adjust the brightness level in the Adjust Brightness dialog
box displayed by tapping
at the bottom left of the Graffiti 2 writing area.
B If the backlight is off, you can turn it on by sliding down the POWER/HOLD switch
and hold it for more than two seconds.