Shark VAC-THEN-STEAM MV2010 - Manual (Page 14)

10 TOLL FREE: 1-800-798-7398
Steam Mode
STEAM CLEANING
1 Plug in the cleaning unit. Slide
the toggle switch to expose the
steam power button.
2 Press the steam power button to the
ON “I” position. The illuminated red
light indicates that the “boiler” is on.
Wait 30 seconds for the water to
heat up and for steam to be ready.
3 Place your foot lightly on the top of
the base. TILT HANDLE BACK TO
ACTIVATE STEAM PUMP.
4 Push handle upright to stop steam.
NOTE: Check water level and fill
anytime throughout the cleaning
process to maintain optimal steam.
2
3
1
MV2010_11_IB_ENG_110103.indd 10 11-01-03 1:26 PM