Specifications for scag ssz zero-turn rider – Scag Power Equipment SSZ User Manual
Page 19
15
SPECIFICATIONS FOR SCAG SSZ ZERO-TURN RIDER
MODELS:SSZ-18CV,SSZ-20CV, SSZ-22CV
CUTTER DECK
SMZ 48, SMZ 52, SMZ 61
Type:
Floating, adjustable, anti-scalping, hybrid design combines
out-front and belly-mount designs
Construction:
10-gauge steel with 7-gauge (3/16") steel skirt
True Cutting Width:
48.0" (122.0 cm), 52" (132.0 cm), 61: (155.0 cm)
Cutting Height Adjustment:
Hand operated lever adjustment from operator's seat, 1-3/4"
to 4-1/2" in 1/2" increments
Cutter Blades:
.204 thick, milled edge, 5150 alloy steel
SMZ 48: Three (3) 16.5" blades
SMZ 52: Three (3) 18 blades
SMZ 61: Three (3) 21" blades
Blade Engagement:
Electric blade engagement clutch with control panel switch
Discharge Opening:
Extra wide 11.5" discharge opening with spring loaded
discharge chute
Caster Wheels:
12x 3.5 with quick pin removal
Spindles:
Heavy duty 1-1/8" top dimension spindle shaft, cast housing,
taper roller bearing, low maintenance with top access grease
fitting and grease overfill relief poppet
Spindle Pulleys:
Cast-iron with easily removed taper hubs
Cutter Deck Belts:
B-section with Kevlar cord
ADDITIONAL SPECIFICATIONS
Seat:
Padded with arm rests
OPTIONAL ITEMS/ATTACHMENTS
Grass Catcher:
Spindle driven GC-SSZ-48 has 48 gallon capacity molded
plastic hopper. GC-SSZ-5BS has 5 HP Briggs auxillary
engine, 48 gallon capacity molded plastic hopper.
Mulching Plate:
Steel plate fits over discharge opening. No blade change
or removal required. Installs and removes in the field.
APPROXIMATE DIMENSIONS
SMZ 48
SMZ 52
SMZ 61
Length:
72.0"
77.0"
77.0"
Tracking Width:
46.0"
49.0"
49.0"
Width:
59.0"
64.5"
73.5"
Width (with discharge chute up):
49.0"
53.0"
62.0"
Height:
48.0"
51.0"
51.0"
Turning Radius:
zero
zero
zero
Weight:
790 lbs.
835 lbs.
865 lbs.
Weight with GC-SSZ-48:
1060 lbs.
Width with GC-SSZ-48
59.0"
Length with GC-SSZ-48:
78.0"
Weight with GC-SSZ-5BS:
1055 lbs.
1085 lbs.
Width with GC-SSZ-5BS:
73.5"
82.5"
Length with GC-SSZ-5BS:
83.0"
83.0"
Date of Issue: September 26, 1996
Specifications Subject To Change Without Notice