Selecting the wide screen mode, Press focus +/– to adjust the focus, Press wide mode – Sony Cineza VPL-HS20 User Manual
Page 27: Pr oj ec ti ng
27
GB
Selecting the Wide Screen Mode
Pr
oj
ec
ti
ng
6
Press FOCUS +/– to adjust the
focus.
Adjust to obtain sharp focus.
To turn off the power
1 Press the
[
/
1
(on/standby) switch.
A message “POWER OFF?” appears on the
screen.
2 Press the
[
/
1
switch again.
The ON/STANDBY indicator flashes in green and
the fan continues to run to reduce the internal heat.
Also, the ON/STANDBY indicator flashes quickly
during which you will not be able to light up the
ON/STANDBY indicator with the [/1 switch.
3 Unplug the AC power cord from the wall
outlet after the fan stops running and the
ON/STANDBY indicator lights in red.
You can turn off the projector by holding the [/1 (on/
standby) switch for about one second, instead of
performing the above steps.
Selecting the Wide
Screen Mode
You can enjoy various wide screen mode according to
the video signal received. You can also select it using
the menu. (
Press WIDE MODE.
Each time you press the button, you can select
the “Wide Mode” setting.
FOCUS +/– button
+
–
+
–
INPUT
LIGHT
STANDARD
CINEMA
DYNAMIC
USER 2
PICTURE MODE
USER 3
USER 1
MS SLIDE
MENU
APA
LENS
VOLUME
SIDE SHOT
RESET
WIDE MODE
ENTER
WIDE MODE button