Sanyo VCC-5984 - Manual (Page 9)

MOUNTING THE LENS
Please use a DC type auto-iris lens (sold separately).
Check the lens mount
Do not use a lens if the length “ L ” is more than 5 mm. That may damage the
camera and prevent proper installation.
1 Remove the lens mount cap from the camera.
2 Install the auto-iris lens.
CS mount type lens
Carefully align the lens mount with the camera opening, then turn the lens slowly to install it.
C mount type lens
To allow for flange-back adjustment, install the C-mount adaptor (option) on the lens mount, then carefully
align the lens mount with the camera opening and turn the lens slowly to install it.
3 Connect the lens plug to the lens iris output connector (LENS) on the side of the camera.
When using lenses from other makers, the plug shape may not correspond to the terminal on the camera.
In such a case, remove the original plug and using a soldering iron, connect the supplied
lens iris plug
according to the diagram. (Refer to page 9.)
L
C mount type lens
1
2
2
3
CS mount
type lens
L53H4/US2 (VCC-5984) GB 2003, 1, 7
8
English