Sanyo VCC-5984 - Manual (Page 18)

SPECIFICATIONS
Camera:
Scanning system : NTSC standard TV system
(525 TV lines, 30 frames/sec.)
Interlace : PLL 2:1 interlace
Image device : 1/3 inch solid state image device CCD
Picture elements : 811 (H) x 508 (V)
Effective picture
elements : 768 (H) x 494 (V)
Synchronizing system : Internal sync, External sync, Automatically
switchable
Resolution : 520 TV lines horizontally, 350 TV lines vertically
Video output level : 1.0 Vp-p/75 ohms, composite
Video S/N ratio : More than 48 dB
Minimum required
illumination
(incandescent
lighting) : Approx. 0.3 lux with a F 1.2 lens (GAIN, HI)
Approx. 0.6 lux with a F 1.2 lens (GAIN,
NORM)
Backlight
compensation : Manual MULT/CENT/OFF switching (Active
when using an auto-iris lens)
Iris function : AI/EI selectable by switches (Electronic shutter)
Electronic iris range : 0.6 lux to 50,000 lux (F 1.2 lens)
Electronic shutter : 7 speeds, selectable by switches:
(1/60, 1/100, 1/500, 1/1000, 1/2000,
1/4000, 1/10000 sec.)
Flange-back : 12.5 mm ± 0.5 mm
White balance : ATW/Manual switching
Lens mount : CS mount
AGC gain : HI/NORM
Environmental
conditions : Temperature: –10° C ~ +50° C
Humidity: less than 90% (no condensation)
Power supply : 24 V AC, 60 Hz
Power consumption : Approx. 2.8 W (with auto iris lens)
Approx. 2.1 W (without auto iris lens)
Weight : Approx. 310 g (without lens)
Dimensions
Features and specifications are subject to change without prior
notice or obligations.
SERVICE
This camera is a precision instruments and if treated with care, will
provide years of satisfactory performance. However, in the event of a
problem, the owner is advised not to attempt to make repairs or open
the cabinet. Servicing should always be referred to your dealer or
Sanyo Authorized Service Centre.
12.6
22.4
11
0.5
109
100
1/4”–20 UNC
56
45
28
L53H4/US2 (VCC-5984) GB 2003, 1, 7
English
17