Sanyo VCC-5984 - Manual (Page 5)

PARTS NAMES
1 Video output connector (VIDEO OUT: BNC type)
Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector.
2 Power input terminal
24 V AC input terminal (AC 24 V, GND)
3 External sync composite video signal input connector (VBS IN: BNC type)
Connect to this connector the synchronizing signal output from a synchronizing signal device or the composite
signal of a video distributor.
4 Power indicator (POWER)
Comes on when the power to the camera is on.
1
4
3
2
L53H4/US2 (VCC-5984) GB 2003, 1, 7
4
English