Sanyo VCC-5984 - Manual (Page 11)

CONNECTIONS
Basic connection for monitoring or recording
The peripheral devices (VCR, monitor, lens, etc.), AC adaptor
and cables are sold separately.
1 Make the video signal connection between the camera and
the monitor or time lapse VCR.
2 Use a commercially available 24 V AC adaptor.
Connect an AC 24 V power source to the AC 24 V input terminal
on the back of the camera.
3 Insert the plug of this power cord into a wall outlet.
The POWER indicator (A) will light. Adjust the picture on the
monitor using the Brightness and Contrast controls etc.
Coaxial cable type and maximum length
• Cable type RG-59U (3C-2V), 250 m maximum.
• Cable type RG-6U (5C-2V), 500 m maximum.
• Cable type RG-11U (7C-2V), 600 m maximum.
CAUTION:
• The RG-59U type cable should not be run through electrical
conduits or through the air.
• Using CCTV/Video-grade coaxial cable.
(Video signal connections)
: VIDEO IN
: VIDEO OUT
(A) 1 3
AC 24 V connection
Push to insert the cable
AC 24 V
GND ~ ~
2
L53H4/US2 (VCC-5984) GB 2003, 1, 7
10
English