Savin SPC210SF - Manual (Page 58)

Receiving a fax
6 - 5
6
Changing the remote codes
The preset Fax Receive Code is 51. The
preset Telephone Answer Code is #51. If you
want to, you can replace them with your own
codes.
1
If it is not illuminated in blue, press
(Fax).
2
Press Menu/Set, 2, 1, 4.
3
Press
▲ or ▼ to select On (or Off).
Press Menu/Set.
4
Enter the new Fax Receive Code.
Press Menu/Set.
5
Enter the new Telephone Answer Code.
Press Menu/Set.
6
Press Stop/Exit.
Note
■
If you are always disconnected when
accessing your external TAD remotely, try
changing the Fax Receive Code and
Telephone Answer Code to another
three-digit code (such as # # # and 9 9 9).
■
Remote Codes might not work with some
telephone systems.
Easy Receive
When you use this feature you do not have to
press Black Start or the Fax Receive Code
51 when you answer a fax call. Selecting
On allows the machine to receive fax calls
automatically, even if you lift the handset of
an extension or external phone. When you
see Receiving on the LCD or when you
hear ‘chirps’ through the handset of an
extension phone connected to another
telephone wall jack, just replace the handset
and your machine will do the rest.
Note
■
If this feature is set to On, but your
machine does not connect a fax call when
you lift an extension or external phone
handset, press the Fax Receive Code
51.
■
If you send faxes from a computer on the
same phone line and the machine
intercepts them, set Easy Receive to Off.
■
Selecting Off means you’ll have to
activate the machine yourself by lifting the
handset of an external or extension
phone, and then press Black Start on the
machine.
—OR—
by pressing
51 if you are not at your
machine. (See Operation from extension
telephones on page 6-6.)
1
If it is not illuminated in blue, press
(Fax).
2
Press Menu/Set, 2, 1, 3.
3
Use ▲ or ▼ to select On (or Off).
Press Menu/Set.
4
Press Stop/Exit.
Setup Receive
4.Remote Codes
Setup Receive
3.Easy Receive