Savin SPC210SF - Manual (Page 26)

Loading paper and documents
2 - 10
2
Loading documents
You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.
Using the ADF (automatic
document feeder)
The ADF can hold up to 35 pages and feeds
each sheet individually. Use standard 20 lb
(80 g/m
2 ) paper and always fan the pages
before putting them in the ADF.
■
Make sure documents written with ink are
completely dry.
■
Documents to be faxed must be from
5.8 to 8.5 in. (147.3 to 215.9 mm) wide
and 5.8 to 14 in. (147.3 to 356 mm) long.
1
Fan the pages well. Make sure you put
the documents face up, top edge first
in the ADF until you feel them touch the
feed roller.
2
Adjust the paper guides to fit the width of
your documents.
3
Unfold the ADF document output
support flap.
IMPORTANT
■
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF
may jam.
■
DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled,
paper-clipped, pasted or taped.
■
DO NOT use cardboard, newspaper or
fabric.
IMPORTANT
DO NOT pull on the document while it is
feeding.