Savin SPC210SF - Manual (Page 37)

Chapter 3
3 - 10
Volume Settings
Ring Volume
You can turn the ring Off or you can select
the ring volume level.
1
Press Menu/Set, 1, 4, 1.
2
Press
▲ or ▼ to select Low, Med, High
or Off.
Press Menu/Set.
3
Press Stop/Exit.
—OR—
You can adjust the ring volume when your
machine is idle (not being used).
In mode (Fax), press or to
adjust the volume level. Every time you press
these keys, the machine will ring so you can
hear the active setting as the LCD shows it.
The volume changes with each key press.
The new setting will stay until you change it
again.
Beeper Volume
You can change the beeper volume. The
default setting is Med. When the beeper is on,
the machine will beep when you press a key,
make a mistake, or after you have sent or
received a fax.
1
Press Menu/Set, 1, 4, 2.
2
Press
▲ or ▼ to select Low, Med, High
or Off.
Press Menu/Set.
3
Press Stop/Exit.
Speaker Volume
You can adjust the machine’s one-way
speaker volume.
1
Press Menu/Set, 1, 4, 3.
2
Press
▲ or ▼ to select Low, Med, High
or Off.
Press Menu/Set.
3
Press Stop/Exit.
—OR—
In Fax mode , you can adjust the
speaker volume by pressing Hook, and then
selecting a speaker volume level.
Press or to adjust the volume
level. The LCD shows the setting you are
choosing. Each key press changes the
volume to the next setting. The new setting
will remain until you change it again.
Volume
1.Ring
▲ ▲
Volume
2.Beeper
Volume
3.Speaker
▲ ▲