Savin SPC210SF - Manual (Page 41)

Chapter 4
4 - 4
Changing the Memory
Security password
1
Press Menu/Set, 1, 8, 1.
2
Press
▲ or ▼ to select Set Password.
Press Menu/Set.
3
Enter the registered four-digit password.
Press Menu/Set.
4
Enter a four-digit number for the new
password.
Press Menu/Set.
5
If the LCD shows Verify:, re-enter the
new password.
Press Menu/Set.
6
Press Stop/Exit.
Turning Memory Security on
1
Press Menu/Set, 1, 8, 1.
2
Press
▲ or ▼ to select Set Security.
Press Menu/Set.
3
Enter the registered four-digit password.
Press Menu/Set.
The machine goes offline and the LCD
shows Secure Mode.
Note
If there is a power failure the data will stay in
memory for up to 60 hours.
Turning Memory Security off
1
Press Menu/Set.
Enter the registered four-digit password.
2
Press Menu/Set.
Memory Security is automatically turned
off and the LCD shows the date and
time.
Note
If you enter the wrong password, the LCD
shows Wrong Password and stays offline.
The machine will stay in Secure Mode until
the registered password is entered.
Security
1.Mem Security