Spectrum Brands SPECTRUM PLUS SP-550 User Manual
Page 36
To Verify Speed Dial Programming
(Administrator Programmable Only)
The contents of each speed dial location can be verified or “checked” while the
SpectrumPLUS
TM
unit is in the programming mode.
To Verify Speed Dial Locations
1. Press and hold the “STORE” key for 6 seconds to activate Administrator mode. The
words “ENTER ACCESS NO.” will appear (figure 1).
2. Next, press the speed dial location key to verify. The display will show the memory
location, the name, and the number in memory.
3. To check other memory locations, simply press other speed dial locations.
4. To exit the program mode, press “DISC”
?
Memory verification is accomplished with the SpectrumPlus
tm
on-hook.
35
Note: Programming can
only be performed when
phone is on-hook
!
NOTE: Blank index card sheets are provided for
convenience. Complete and place the index card into
the speed dial memory key.
!
NOTE: A Caller ID record cannot be stored into the speed dial key memory location. Entries can
only be made manually by the Administrator programming feature. This is for purposes of security
and standardization of speed dial locations.
!