Swisher ZT2560 - Manual (Page 22)

SERVICE & ADJUSTMENTS
Deck Belt Routing & Replacement
Disconnect spark plug wire
Apply parking brake
Lower the deck to its lowest position
Remove the belt covers
Disconnect tension idler
Roll the belt over the top of the deck pulleys
Remove belt
Removal
Install new belt by placing it around
the deck pulleys. Refer to routing
diagram below.
The belt will be loose at this time
Tightly secure the belt tension back
to its original position
Reinstall the belt covers
Reconnect spark plug wire
Replacement
Front of Unit
For replacement belt part number refer to Replacement Parts
Quick Reference Chart in this manual
22 22