Operation – Swisher ZT2560 User Manual
Page 19
OPERATION
Starting
Operator must be sitting in the seat. Control handles must be in the neutral
(outward) position (which sets the parking brakes). PTO must be in the disengage
position (pushed down).
Set choke (if needed), turn key and release as soon as engine starts. Adjust
throttle to half and shut choke off.
Close motion control levers (move inward), releasing the Parking Brakes
Be sure all people are clear of the area. Engage blades and set RPM to
maximum.
Grass Height & Cutting Suggestions
Do not attempt to cut wet grass
The average lawn should be cut to 2 ½” during the cool season and to over 3”
during the hot months. For healthier and better looking lawns, mow often and after
moderate growth.
As a rule , never cut more than 1/3 of the total grass blade length. Correct mowing
height can reduce weeds and lawn disease.
For best performance, grass over 6 inches in height should be mowed twice. The
first cut should be set relatively high and the second set to the desired height.
NOTE:
If you have never used a Zero
Turn mower before, refer to the
Operation Controls section of
this manual before attempting to
operate one for the first time.
19
19