Sony KP-44DX2 - Manual (Page 8)

8
Connecting the Aerial and VCR
One RF Loopthrough cable is supplied. The rest of connecting cables are not supplied.
The Scart lead is optional. If you use this optional connection it can improve picture and sound quality when using a VCR.
• If you do not use a Scart lead, after automatically tuning the projection TV refer to the section “Manual Programme Preset”
on page 20 to tune in the projection TV to the output of your VCR. Also refer to your VCR instruction manual to find out
how to find the output channel of your VCR.
• For more details of VCR connections as well as other connections, please refer to the section “Additional information when
connecting equipment” on page 33.
Inserting Batteries into the Remote Control
Make sure you insert the supplied batteries using the correct polarities.
Always remember to dispose of used batteries in an environmental friendly way.
VCR
OUT IN
or
Installation