Sony KP-44DX2 User Manual
Page 18
18
AV2 OUTPUT
This option allows you to select the source to be output from the Scart connector
2
/
2
so that you can
record from this Scart any signal coming from the projection TV or from an external equipment connected
to the Scart connector
1
/
1
or side connectors
3
or
3
and
3
.
If your VCR supports SmartLink, this procedure is not necessary.
To do this:
Once you have entered into the “Features” menu as it is explained in the previous page and after selecting
the option, press
b
. Then press
v
or
V
to select the desired output signal:
• TV
to output the aerial source.
• AV1
to output sources connected to
1
/
1.
• AV3
to output sources connected to
3
and
3
.
• YC3
to output sources connected to
3
and
3
.
• AUTO
to output the signal that is being viewed on the TV.
• If you select “AUTO”, the output signal will always be the same one that is displayed on the screen.
• If you have connected a decoder to the Scart
2
/
2
or to a VCR connected to this Scart, please
remember to change back the “AV2 Output” to “AUTO” or “TV” for correct unscrambling.
PIP INPUT
This option allows you to select the source you want to watch in the “PIP” screen.
To do this:
Once you have entered into the “Features” menu as it is explained in the previous page and after selecting
the option, press
b
. Then press
v
or
V
repeatedly to select the desired source AV1, AV2, AV3 or TV. Finally
press OK to store.
To watch the “PIP” screen with the selected source, press
the
/
button on the remote control.
You can swap the screens by pressing the
/
button on
the remote control.
PIP POSITION
This option allows you to change the position of the “PIP” screen within the main screen.
To do this:
Once you have entered into the “Features” menu as it is explained in the previous page and after selecting
the option, press
v
/
V
/
B
or
b
to select the desired position. Finally press OK to store.
S
S
S
S
B
B
B
The General TV Menus