SEH Computertechnik ISD300 - Manual (Page 9)

ISD300 User Manual
ISD300 User Manual
Using the Panel Interface
9
How to switch on the ISD300?
Proceed as follows:
1. Switch on the power switch on the backside.
2. Switch on the soft power switch
on the frontside.
The ISD300 boots automatically.
How to switch off the ISD300?
Print jobs that are halted by the device being switched off will not be
completed. Print jobs in a queue will be completed when the device
reboots. This also applies in the case of power failures. To avoid
loss of data, shutdown the ISD300 before you switch off the power
switch.
Proceed as follows:
1. Keep pressed for five seconds.
The device shuts down and switches off.
2. Switch off the power switch on the backside.
How to get information from the front display?
It is possible to get the following informations via the display of the
panel interface:
- IP Address,
- Date and Time,
- Harddisk usage,
- MAC Address
To get information use the navigation key on the ISD300. The
information is indicated in sequence.