SEH Computertechnik ISD300 - Manual (Page 15)

ISD300 User Manual
ISD300 User Manual
Network Settings
15
4. Press to confirm.
Apply|Back appears in the display.
5. Press to confirm.
Upon booting DHCP will be applied automatically. TCP/IP
parameters are assigned by a DHCP server.
Setting TCP/IP parameter via ISD300 Homepage
Proceed as follows:
1. Click Configuration.
2. Click TCP/IP.
3. Enter the TCP/IP paramter manually or enable the ’DHCP’
option; see Table: Parameter Settings - TCP/IP.
4. Click Set.
Table: Parameter Settings - TCP/IP
How to set a Host Name?
You can set a host name for the ISD300. The host name and the IP
address are displayed at the top left side of the browser window.
Proceed as follows:
1. Click Configuration.
2. Click Board Settings.
Parameter Description
IP address IP address of the ISD300 (e.g. 192.168.0.21)
Netmask Netmask
Gateway IP address of the gateway used to access other
networks or subnets. This enables the ISD300 to
communicate with devices on other subnets.
DHCP Enable DHCP to set TCP/IP parameter via DHCP.
The TCP/IP parameters are assigned by a DHCP
server during the next reboot of the ISD300.