First steps, Isd300 user manual – SEH Computertechnik ISD300 User Manual
Page 6
ISD300 User Manual
ISD300 User Manual
General Information
6
First Steps
Follow the steps to configure the ISD300 quickly and easily. After
that, the ISD300 is ready for operation.
1. Connect the ISD300 to the network and the power supply. For
further information see the Quick Installation.
2. Switch on the ISD300; see: How to switch on the ISD300? on
3. Configure the IP Settings; see: Setting TCP/IP parameter
manually via panel interface on page 13.
4. Start the ISD300 Homepage; see: How to open the ISD300
5. Log on the the ISD300 Homepage; see: How to log on to the
6. Configure TCP/IP Network Settings and identify the printers in
the network; see: Network Settings on page 13.
7. Configure Microsoft
®
Network Settings and define a printer
administrator account; see: Microsoft Authentication (SMB) on
page 20.
8. Install the drivers; see: Managing Print Drivers on page 26.
9. Configure the printer queues; see: Managing Queues and Jobs