Schneider Electric POWERLOGIC PWRSRV750 - Manual (Page 42)

Appendix C—Using a Crossover Cable to Configure the Power Server 63230-216-207/A3
9/2002
© 2002 Schneider Electric All Rights Reserved 38
18. After changing the options, verify that all settings are correct.
19. At the Enter Option prompt, type 5 to quit.
The Power Server reboots automatically. During the reboot, your
NetMeeting session is closed automatically.
Now you are ready to configure the PowerLogic System applications as
described in the section, “Connecting to the Power Server with NetMeeting”
on page 20.