Schneider Electric POWERLOGIC PWRSRV750 - Manual (Page 28)

Chapter 5—Setup 63230-216-207/A3
Configuring the Power Server 9/2002
© 2002 Schneider Electric All Rights Reserved 24
2. Press Ctrl-W to display the Power Server desktop.
The Power Server desktop displays. Verify that all the taskbar icons
display as shown in Figure 5–3.
Figure 5–3: Power Server Desktop
To configure the Power Server you:
1. Set the time zone and daylight savings time preference.
2. Place the Power Server in setup mode.
3. Configure your POWERLOGIC system.
4. Return the Power Server to run mode.
Each of these procedures is described in this section. You can also create
quick tables, diagrams, and reports for the Power Server Model
PWRSRV750. Refer to the Power Server user’s guide 63230-216-207 for
details.
Taskbar icons
Power Server icon
Powerlogic Server
icon
NOTE: Icons may be arranged differently than they are shown in this
illustration.