Schneider Electric POWERLOGIC PWRSRV750 - Manual (Page 38)

Appendix C—Using a Crossover Cable to Configure the Power Server 63230-216-207/A3
9/2002
© 2002 Schneider Electric All Rights Reserved 34
5. From the Local Area Connection Status dialog box, click Properties.
The Local Area Connection Properties dialog box displays.
6. From the Local Area Connection Properties dialog box, select Internet
Protocol (TCP/IP) and click Properties.
The Internet Protocol (TCP/IP) Properties dialog box displays.
7. From the Internet Protocol (TCP/IP) Properties dialog box, select “Use
the following IP address.”
8. Enter the IP address (10.10.10.11) and subnet mask (255.255.255.0).
9. Click OK and reboot your PC.
10. From your PC, start NetMeeting. Click Start > Programs > Accessories >
Communications > Netmeeting (Windows 2000 path).
NOTE: For Windows XP users, Windows XP does not provide any
shortcut to NetMeeting. You can access it by searching for the file
“conf.exe” or launch it by typing conf.exe in the Run dialog.