Configuring the powerserver, Configuring the power server – Schneider Electric POWERLOGIC PWRSRV750 User Manual
Page 27
63230-216-207/A3
Chapter 5—Setup
9/2002
Configuring the Power Server
23
© 2002 Schneider Electric All Rights Reserved
CONFIGURING THE POWER SERVER
1. Use NetMeeting to access the Power Server.
The Power Server splash screen displays.
NOTE: During the startup process, the Power Server displays the splash
screen with a DO NOT TOUCH Ø symbol. Wait until this symbol no
longer displays before proceeding with the configuration.
This manual is related to the following products: