Sharp UX-355L - Manual (Page 65)

Sending a Fax by Automatic Dialing
63
3. S
ending
Doc
u
ments
8
Return to Step 3 to store another
number, or press the STOP key to
return to the date and time display.
Chain Dialing for area and access codes
You can also store an area code or access code in a Rapid Key or
Speed Dial number. To use this number to dial, see Chain Dialing on
page 86.
Note: An area code or access code stored in a Rapid Key or Speed Dial
number can only be used if the handset is lifted or the SPEAKER key is
pressed before dialing.
2
Press 2 to select CLEAR.
3
Enter the Speed Dial number that you
want to clear by pressing the number
keys.
FAX/TEL # MODE
1=SET,2=CLEAR
2
0 1
(Example)
Step 3 or
Clearing auto-dial numbers
1
Press these keys:
The display will show:
3
STOP
FUNCTION
all.book Page 63 Wednesday, April 26, 2000 7:08 PM