Sharp UX-355L - Manual (Page 118)

Timer Operations
116
Timer Operations
The Timer function allows you to set a transmission and/or polling
operation to be performed automatically at a time you specify. One
transmission operation and one polling operation can be set at any one
time, and the times they will be performed can be specified up to 24
hours in advance.
♦
You can use this function to take advantage of lower off-peak tele-
phone rates without having to be there when the operation is per-
formed.
Note: Only a Speed Dial number can be used to dial the receiving
machine.
Setting a timer operation
1
Press these keys:
The display will show:
2
Press # to set a transmission operation
(SEND MODE), or
* to set a polling
operation (POLLING MODE).
3
Press 1 to select SET.
FUNCTION
1
1
TIMER MODE
4
Enter the time at which you want the
operation to take place (2 digits for
the hour and 2 digits for the minute).
0 5 9 2
Example: 9:25
or
SEND POLLING
all.book Page 116 Wednesday, April 26, 2000 7:08 PM