Sharp UX-355L - Manual (Page 102)

Distinctive Ring
100
3
Press a number from 1 to 3 to select
the ring pattern below that matches
your second number’s ring pattern.
Or, press 4 to have your fax
automatically answer your normal
telephone number. Press 5 to turn off
the distinctive ring function.
RING PATTERN 1 Two short rings
RING PATTERN 2 One short, one long, and one
short ring
RING PATTERN 3 Two short rings and one long ring
STANDARD RING Your standard (normal) ring
pattern
OFF SETTING Turn distinctive ring off
4
Press the STOP key to return to the
date and time display.
4
5
3
1
2
The display will show:
FAX SIGNAL RX
5
Set the reception mode to FAX.
FAX TEL
A.M.
♦
When using distinctive ring, you must set the reception mode of
your fax machine to FAX. When your designated fax number is
dialed, your fax will automatically answer and begin reception after
two rings. Note that other devices on the same line will also ring
until your fax answers. If one of your other numbers is dialed, the
fax will ring; however, it will not answer.
STOP
RECEPTION
MODE
all.book Page 100 Wednesday, April 26, 2000 7:08 PM