Sharp UX-355L - Manual (Page 113)

Sending Documents From Memory
111
8. S
pec
ia
l
Func
ti
ons
3
Enter the number of the receiving
machine using one of the following
methods:
•
Press a Rapid Key.
•
Press the SPEED DIAL key and
enter a Speed Dial number.
•
Enter a full telephone number by
pressing the number keys.
4
Press the START/MEMORY key if
you entered a Speed Dial number or a
full number.
•
The document will be scanned and
stored in memory. Your fax will
then dial the receiving machine and
transmit the document (redialing
will take place automatically if
necessary).
If the memory becomes full...
If the memory becomes full while the document is being scanned,
MEMORY IS FULL will appear in the display.
♦
Press the START/MEMORY key if you want to transmit the pages
which have been stored up to that point in memory. The remaining
pages will be ejected from the feeder. After transmission, the mem-
ory will be cleared and you can transmit the remaining pages. You
will also need to transmit the page which was being scanned when
the memory filled up.
♦
Press the STOP key if you want to cancel the entire transmission.
01 02 03
(Example)
START/MEMORY
all.book Page 111 Wednesday, April 26, 2000 7:08 PM