Sharp UX-355L - Manual (Page 22)

Loading the Imaging Film
20
11
Rotate the large gear toward you until
the film is taut.
12
Close the print compartment cover
(press down on both sides to make
sure it clicks into place), and then
close the operation panel.
13
Load paper in the paper tray and then
press the following keys to initialize
the film.
Note: Paper must be loaded before the film can be initialized. To load
paper, see Loading the Printing Paper on page 22.
6
Display shows:
INITIALIZE FILM
START/MEMORY
FUNCTION
Click!
all.book Page 20 Wednesday, April 26, 2000 7:08 PM