Sanyo CLT-D5880 - Manual (Page 23)

E21
USING
THE INTERFACE
Global Setup
If you change one of the global settings, you change that setting for all
registered handsets. Only one handset can change global settings at a time.
Setting Day and Time
Day & Time sets the day and time of your display.
1
Press the MENU soft key. Select the Global Setup
menu, and then the Day & Time submenu option.
2
Press VOL/ ▲ or VOL/▼ to select the day of the
week, and then the / / soft key.
3
Press VOL/ ▲ or VOL/▼ to set hour, and then press the / / soft key.
4
Press VOL/ ▲ or VOL/▼ to set minute, and then press the / / soft key.
5
Press VOL/ ▲ or VOL/▼ to choose AM or PM , and then press the SAVE soft
key. You will hear a confirmation tone.
Setting CIDCW (Caller ID on Call Waiting)
Caller ID on Call Waiting (CIDCW) displays the name and number of an
incoming call while you are on the line. Call Waiting Deluxe (CWDX) allows
you to handle call waiting calls in seven different ways.
1
Press the MENU soft key. Select the Global Setup
menu, and then the CIDCW submenu.
2
Press VOL/ ▲ or VOL/▼ to select CW On / CWDX On , CW On / CWDX Off ,
or CW Off / CWDX Off , and then press the OK soft key. You will hear a
confirmation tone.
D a y & T i m e
M O N 1 2 : 0 0 A M
[ / ]
BACK SAVE
C I D C W
C W O n / C W D X O n
C W O n / C W D X O f f
BACK D E L E T E OK
• For setting the Day and Time, the idle time-out is extended to 2 minutes.
Note:
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 21