Sanyo CLT-D5880 - Manual (Page 12)

E10
GETTING
STARTED
Direct Wall Mounting
If you don't have a standard wall plate, you can mount your phone directly to
the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location
that could cause a hazard when inserting screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack to avoid
excessive cable lengths.
• Make sure the wall material is capable of supporting the weight of the base
and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices
suitable for the wall material where the base unit will be placed.
1
Insert two mounting screws into the wall, (with their
appropriate anchoring device), 3-15/16 inches apart.
Allow about 1/8 of an inch between the wall and
screw heads for mounting the phone.
2
Refer to steps 1 through 7 on page E9 to mount the
telephone.
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 10