Sanyo CLT-D5880 - Manual (Page 17)

E15
USING
THE INTERFACE
Below are some tips for using the software interface on your phone.
• Press the MENU soft key to access the main menu.
• Use VOL/ ▲ and VOL/▼ to scroll through options.
• Press the OK soft key to make a selection.
• Press the BACK soft key to return to the previous
screen.
• Press END to exit the menu.
Walkie-Talkie Mode
In Walkie-Talkie mode, a pair of handsets can function as two-way radios.
Walkie-Talkie mode allows two handsets to communicate with each other
without the base unit or a telephone line. Use them at sporting events or
while shopping to stay in contact with family members or friends. You must
set both handsets to Walkie-Talkie mode to activate this feature.
Using Walkie-Talkie Mode (for CLT-D5882/CLT-D5883)
1
Press the MENU soft key and select the DirectLink
Mode menu.
To enter DirectLink mode press
[ENTER] appears.
2
Press the ENTER soft key to enter Walkie-Talkie mode. You will hear a
confirmation tone, and
DirectLink Mode Complete appears.
3
To return to normal mode, press the CANCEL soft key and then the OK soft
key, or return the handset to the cradle.
Setting Menu Options
D i r e c t L i n k M o d e
R o o m M o n i t o r
H a n d s e t S e t u p
BACK BACK OK
T o e n t e r
D i r e c t L i n k m o d e
p r e s s [ E N T E R ]
BACK BACK ENTER
• You must have at least two handsets to use Walkie-Talkie mode.
Note:
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 15