Sunwave Tech. SRC-2200 User Manual

Page 28

Macros and Timers have the following three types of status:

• Macro is set, but timer is not.

• Macro is set, and timer is activated.

• Macro is set, but timer is NOT activated.

Add a Timer after the Macro is set.

Go to Macro/Timer, then select Set Timer.
Path: REMOTE SETUP

Æ Macro/Timer Æ Set Timer.

Select the Macro that requires a Timer, and set it according to the above steps.

: indicates a Macro is already set up.

: indicates a Timer is already activated.

3. Turn off the timer after the timer is set. Select the Macro which will not need a

Timer.

4. Select Off on the top to disable the Timer function. Press Next to save setting

press Back to return to the Set timer page.