Sunwave Tech. SRC-2200 User Manual
Page 15
(1) Access the Setup menu and select
Learning to begin the learning
procedures.
(2) Press the scroll key
to select the
device you want to learn, and then
enter the device to learn each single
key. Learning process for both soft and
hard keys will be done and shown on
the screen.
Note: A key with “
” mark means it’s a
hard key.
(3) Aim the transceiver of your original
remote control at the Learning Eye,
keep a distance of between 2 and 4
inches. (approx. 5-10 cm)
(4) Follow the wizard, which guides you to
learn the key one by one, or directly
select keys you want to assign codes
to.
(5) Press a corresponding key on original
remote until “
√” appears on the right
hand side of the learning key and two
beeps are heard; then release the key.
14