Sunwave Tech. SRC-2200 - Manual (Page 26)

transmit IR code to the SRC-2200, until
the number on the right side is changed.
Refer to the Learning function chart on
page14.
Step 5:
Input all commands from every remote
control into the “Learning Macro” in
order. The default delay time is 1 sec
(unchangeable) between two
commands. It can store up to 16
commands.
Step 6:
Press Done to save the setting. After
the Learning Macro setup finishes, a
sign appears next to the appointed key.
Macro Key Timer Settings
Macro key timer settings provide a customized transmission of Macro commands on
the specific time and date (in other words, it’s a scheduled transmission function).
Once a group of Macros is set, you can select the SRC-2200 to automatically send
the scheduled time and date.
1. After the initial setting of a Macro is completed, you will be at the Timer Setting
page, where you can select whether to use the Timer function or not. Select YES
if you want this Macro to have a Timer function.
Note: A Date and a Day of the week cannot be set repeatedly; you can only
one option. choose
25