Sunwave Tech. SRC-2200 - Manual (Page 19)

Deleting Code
Select Delete and then select Code. You may choose to delete all codes for a group of
devices, or delete a single code for a single key.
Delete all codes for a device
(1) Select a device you wish to
delete from the Main Menu.
(2) Press Delete to display a
confirmation page. Select
“Yes” to remove all the
codes for the device.
Delete a code for a single key
(1) Select the device you wish to delete from the Main Menu.
(2) Press the scroll key to select a key with the code to be deleted. An “X”
appears on the right side of the key which means the code of the key is ready
to be deleted.
(3) If you change your mind, just select the key again to cancel the “X”.
(4) Repeat steps (2) and (3) to select all key codes you want to delete.
(5) Press Done to confirm the deletion.
A key with a “ ” mark is a hard key.
A key without the “ ” mark is a soft key.
18