Sun Microsystems Netra CP2500 User Manual
Page 64
50
Netra CP2500 Board Programming Guide • March 2007
int ufd0;
uflash_if_t ufif0;
char *buf0;
char *module;
static int
uflash_init() {
char *buf0 = malloc(ufif0.info.blk_size);
if (!buf0) {
printf("%s: cannot allocate memory\n", module);
return(-1);
}
/* open device */
if ((ufd0 = open(uflash0, O_RDWR)) == -1 ) {
perror("uflash0: ");
exit(1);
}
/* get uflash sizes */
if (ioctl(ufd0, UIOCIBLK, &ufif0) == -1 ) {
perror("ioctl(ufd0, UIOCIBLK): ");
exit(1);
}
if (ufd0) {
printf("%s: \n", uflash0);
printf("manfacturer id = 0x%p\n", ufif0.info.mfr_id);
printf("device id = 0x%p\n", ufif0.info.dev_id);
printf("number of blocks = 0x%p", ufif0.info.blk_num);
printf("block size = 0x%p" ufif0.info.blk_size);
}
}
static int
uflash_uninit() {
if (ufd0)
close(ufd0);
cleanup:
if (buf0)
free(buf0);
}
static int
uflash_write() {
int i;
/* write some pattern to the buffers */
for (i = 0; i < ufif0.info.blk_size; i += sizeof(int))
*((int *) (buf0 + i)) = 0xDEADBEEF;
/* write block 0 of user flash */
if (pwrite(ufd0, buf0, ufif0.info.blk_size, 0) != ufif0.info.blk_size)
perror("uflash0:write");
return(0);
CODE EXAMPLE 3-4
Write Action on User Flash Device (Continued)