Sony GRAND WEGA KF 42WE610 - Manual (Page 98)

Other Information
98
Flashing Indicators on the Front of the Monitor
The POWER/STANDBY (red) and/or LAMP (red) indicators indicate the
conditions of the LCD projection TV and warnings by lighting or flashing,
as follows.
The POWER/STANDBY indicator flashes.
❑ The lamp for the light source is ready to turn on.
The POWER/STANDBY indicator flashes three times.
❑ The lamp cover is not attached securely. When you correct, the
POWER/STANDBY indicator goes out and the LCD projection TV
enters the standby mode (see page 16).
The LAMP indicator flashes.
❑ The lamp for the light source burns out.
Replace it with new one (see page 13).
If the LCD projection TV is not recovered after correcting the problems,
contact with qualified Sony personnel.
POWER/STANDBY
TIMER
LAMP
POWER/STANDBY
TIMER
LAMP
KF-42WE610
KF-50WE610/
60WE610