Sony GRAND WEGA KF 42WE610 - Manual (Page 25)

Installing and Connecting the LCD Projection TV
25
In
sta
lling
and
Conne
ctin
g the
LCD Pr
o
jec
tion T
V
Basic Connections (Connecting Cable TV or Antenna)
Connecting Directly
to Cable or an
Antenna The connection you choose depends on the cable found in your home. Newer
homes are equipped with standard coaxial cable (see
A ); older homes
probably have 300-ohm twin lead cable (see B ); other homes may contain
both (see C ).
A VHF Only or VHF/UHF or Cable
B VHF Only or UHF Only or VHF/UHF
C VHF and UHF
✍
It is highly recommended to connect the antenna using a 75-ohm coaxial
cable to get optimum picture quality. A 300-ohm twin lead cable can be
easily affected by radio noise and the like, resulting in signal
deterioration. If you use a 300-ohm twin lead cable, keep it away as far
as possible from the LCD projection TV.
✍
Do not use an indoor antenna because it is especially susceptible to
radio noise.
75-ohm coaxial
cable
Rear of LCD projection TV
VHF/UHF
Rear of LCD projection TV
Antenna connector
300-ohm twin lead cable
VHF/UHF
Rear of LCD projection
TV
75-ohm coaxial cable
VHF/UHF U/V Splitter
(not supplied)
300-ohm twin lead cable