Sony GRAND WEGA KF 42WE610 User Manual
Page 97
Other Information
97
Ot
h
e
r Informa
tion
General
Problem
Possible Remedies
How to restore Video settings
to factory settings
❏
Press
RESET
on the remote control while in the Video Menu (see page 69).
How to restore Audio settings
to factory settings
❏
Press
RESET
on the remote control while in the Audio Menu (see page 72).
Cannot cycle through the other
video equipment connected to
the TV
❏
Be sure the
Video Label
option is not set to
Skip
(see page 83).
Cannot operate Menu
❏
If a menu option appears in gray, this indicates that the menu option is not
available.
Lost password
❏
In the password screen (see page 78), enter the following master password:
4357
.
The master password clears your previous password; it cannot be used to
temporarily unblock channels.
LED on the display unit is lit
❏
The POWER/STANDBY LED lights up when the TV is turned on. If the LED
blinks continuously, this may indicate the TV needs a service.
❏
The TIMER LED indicates that the timer is set. When the timer is set, this LED
will remain lit even when the LCD porjection TV is turned off.
LCD projection TV is fixed to
one channel
❏
Use
Auto Program
in the Channel menu to add receivable channels that
are not presently in TV memory (see page 76).
❏
Check your
Channel Fix
settings (see page 76).