SIGMA BENEFON TDP-52-SN3 - Manual (Page 16)

27.1.1999
6DP_52GB 1
Product: TDP-52-SN3 /
3.0 INSTALLATION INSTRUCTIONS
3.1 Phone Programming
You can program Benefon Sigma Gold by using either the keys on your phone,
or the BeneLoc computer program. In either case, you will need a localbox.
Programming Menu Commands:
- SALES DATE
- RADIO PATH ID
- PHONE CODE
- HF-FUNCTION
- SW VERSION
- SAK
- PRODUCT CODE
- UPDATE LOCALBOX
- BASE BAND
- RESET RAM
3.1.1 To program Using the Phone Keys
1. Connect the localbox to your phone, and turn the phone on.
2. Press and the following text will appear in the display: ***BENEFON***.
*
will be flashing in the display.
3.1.1.1 Sales Date
1. Choose SELECT. The following text will appear in the display:
SALES DATE [XXXXXX].
2. Choose CHANGE. [XXXXXX] will be replaced by the date
[daydaymonthmonthyearyear]. Remember to check that the date is correct.
If the date is correct, choose
SAVE. If the date is incorrect, delete it by
choosing and enter the correct date (six digits in the following form:
daydaymonthmonthyearyear). To save the date, choose SAVE.
CAR KIT TUNING (background noise tuning)
CAR KIT SWING (MIC-ERP contrast tuning)
OFFICE SET TUNING (background noise tuning)
OFFICE SET SWING (MIC-ERP contrast tuning)