beautypg.com

Printing on card stock or custom-sized materials – Samsung ML-1750 Series User Manual

Page 54

background image

U

SING

P

RINT

M

ATERIALS

3.15

3

Printing on Card Stock or
Custom-sized Materials

Postcards, 3.5 by 5.83 in.(index) cards and other custom-sized
materials can be printed with this printer. The minimum size is
76 by 127mm(3.0 by 5.0 in.) and the maximum size is 216 by
356mm(8.5 by 14 in.).

1

Open the rear output tray. Load print material with print
side up
, short edge first and against the left edge of the
feeder.

2

Adjust the guide to fit the width of the material.

Guidelines
• Always insert the short-edge into the Manual Feeder first. If

you want to print in landscape mode, make this selection
through your software. Inserting paper long-edge first may
cause a paper jam.

• Do not print on media smaller than 76mm (3.0 in.) wide or

127mm(5.0 in.) long.

• When you print on 76mm x 127mm sized media with loading

into the tray, open the rear output tray.

This manual is related to the following products: