Samsung ML-1750 Series - Manual (Page 131)

A PPENDIX 7.12
Printing from DOS Applications
While your printer is primarily a Windows printer, you can also
print from a DOS software program using the Remote Control
Panel utility provided in the supplied software CD-ROM.
About the Remote Control Panel
DOS users have access to many printer features through specific
DOS printer drivers; however, many software manufactures do
not develop printer drivers for their software programs. The
printer provides the software control panel for improved printer
control when DOS printer drivers are not available or when
certain print settings are not available through DOS software
programs.
Note: The printer’s Remote Control Panel is not a printer driver. It
should be used to set print settings that are not available through
DOS software programs. Printer drivers are supplied by the
manufacturers of your DOS software programs. If your DOS
software program does not include a printer driver for your printer,
contact the manufacturer of the software program or use one of
the alternate printer drivers.
Installing the Remote Control Panel
The Remote Control Panel utility is provided on the printer
software CD-ROM.
1 Place the CD-ROM in the CD-ROM drive. Installation will
start automatically.
If the CD-ROM drive does not automatically run:
Select Run from the Start menu, and type
x:\cdsetup.exe in the Open box (where x is the drive
letter for the CD-ROM drive), and click OK.