Samsung ML-1750 Series - Manual (Page 135)

A PPENDIX 7.16
CONFIG
You can configure various printer features.
• Emulation selects the emulation for printing a document.
The factory default is Auto.
• Power Save determines the length of time the printer waits
after a job is printed before it goes to a reduced power state.
If the printer is used frequently, select OFF which keeps the
printer ready to print with the minimum warm-up time. This
uses more power to keep the printer warm and ready to print.
• Auto Continue determines what action the printer should
take when a manual feed print job is sent to the printer. If it
is checked, the printer will pick up the paper from the tray
after fifteen seconds. Otherwise, the printer will wait for you
to load paper in the manual feeder.
• Jam Recovery determines what action the printer should
take when a paper jam occurs. If it is unchecked, the printer
does not reprint a page that has jammed. If it is check, the
printer keeps the image in memory for a printed page until
the printer signals that the page has successfully printed. The
printer reprints all jammed pages.
• Toner Save determines the toner quantity the printer should
use when printing. If it is checked, the printer conserves
toner when printing. The default value is unchecked, which
provides 100% usage.
• Altitude: helps the printer optimize its output for a low
pressure area, such as a high mountain area.