Samsung ML--6100 - Manual (Page 22)

2. 5 Printer Setup
3. Fan the paper and load the paper in the cassette with the print side
facing down. The print side is usually indicated on the paper package.
XXXXXXXXXX
If you are using a preprinted stock, such as letterhead, place the printed
design side face down with the top edge of the page toward the front
of the cassette.
4. Make sure that the stack goes under the metal retaining clip and
the plastic tabs on the end guides. Paper overloading may cause paper
jams.
Make sure that paper is
under this metal clip.
A
A