Southbend SB1046PF - Manual (Page 137)

For Machines Mfg. Since 3/11 Turn-Nado ® Gearhead Lathes
-135-
P A R T S
Rear Machine Labels
The safety labels provided with your machine are used to make the operator aware of the
machine hazards and ways to prevent injury. The owner of this machine MUST maintain the
original location and readability of these safety labels. If any label is removed or becomes
unreadable, REPLACE that label before using the machine again. Contact South Bend Lathe Co. at
(360) 734-1540 or www.southbendlathe.com to order new labels.
WARNING! ! !
INJURY/SHOCK
HAZARD
To avoid shock or
accidental starting,
disconnect power
before adjusting or
servicing machine.
WARNING! !
INJURY HAZARD
Always remove
chuck key from chuck
immediately after
making adjustments
to avoid serious
personal injury.
All labels must be made from
an oil-resistant material
WARNING! !
loose clothing, hair
or jewelry to reduce
the risk of serious
injury or death.
WARNING! ! !
INJURY/SHOCK
HAZARD
To avoid shock or
accidental starting,
disconnect power
before adjusting or
servicing machine.
WARNING! !
INJURY HAZARD
Always remove
chuck key from chuck
immediately after
making adjustments
to avoid serious
personal injury.
All labels must be made from
an oil-resistant material
WARNING! !
POISON/
BIOHAZARD
Refer to the cutting
fluid manufacturer’s
Material Safety Data
Sheets (MSDS) for
WARNING! !
ENTANGLEMENT
HAZARD
Remove or secure
loose clothing, hair
or jewelry to reduce
the risk of serious
injury or death.
WARNING! !
EYE INJURY
HAZARD
Always wear ANSI
approved safety
glasses when using
this machine.
INJURY HAZARD
Do not use machine
if you have not read
the manual. Visit
southbendlathe.com
or call 360-734-1540
to get a manual.
WARNING! !
WARNING! ! !
INJURY/SHOCK
HAZARD
To avoid shock or
accidental starting,
disconnect power
before adjusting or
servicing machine.
WARNING! !
INJURY HAZARD
Always remove
chuck key from chuck
immediately after
making adjustments
to avoid serious
personal injury.
!
Remove or secure
loose clothing, hair
or jewelry to reduce
the risk of serious
injury or death.
!
EYE INJURY
Always wear ANSI
approved safety
glasses when using
this machine.
SB1057F Labels (C)
440V
3-Ph
4,8,12,16,20,24,
28,32,36,40,44,
48,56,60,72 Any Position
In.
Non-
Numbered
Position
Numbered
Position
1,2,3,4
Position
1,3 or 2,4
Position
1 Only 2,6,10,14,
18,22,26,
30,54
3,5,7,9,
11,13,15,
19,23,27
2½,3½,4½,
7½,11½,13½
2¼,2¾,
3¼,3¾
2
7 ∕ 8
1
2 3
4
Same as
Metric
Threads
All labels are shown at 100% and must
be made from an oil-resistant material.
ONE SHO
T
OILER
NOTICE
Loosen the
carriage lock
bolt before
engaging the
carriage
leadscrew.
Factory must verify accuracy of this label
2118
2119
2103
2103
REF PART # DESCRIPTION REF PART # DESCRIPTION
2103 PSBLABEL02HL DISCONNECT POWER LABEL HL 2119 PSB1048PF2119 440V 3-PHASE LABEL
2118 PSBLABEL15L ELECTRICITY LABEL