beautypg.com

Picture control window, Input source, Signal info (information) – Sony SRX- R110 User Manual

Page 26

background image

GB

26

PICTURE CONTROL Window

Cha

pte

r 4
A

d

jus
tment

s

a

nd Set

tings
Us

ing t

he SRX Con

tro
ller

About the items that cannot be adjusted

Items that cannot be adjusted depending on the input signal
are not displayed in the window.

For details, see “Input Signals And Adjustable/Setting
Items” on page 30.

PICTURE CONTROL
Window

The PICTURE CONTROL window is used to select the
input source or to adjust the picture quality.
When the screen mode is set to “dual screen” or “quad
screen,” the items can be independently adjusted for each
input channel displayed on the screen.

Input Source

Signal Mode: Click

to select the type of signal from

the drop-down list when a high-definition signal is
input from equipment connected to the optional
LKRI-001 input board. Select “YPbPr” to input the
high-definition signal from component equipment,
and “RGB” to input the high-definition signal from
video GBR equipment.

I/P Mode: Selects the I/P conversion mode. Depending on

the input signal source, set the mode to “Interlace” or
“PsF.”

Signal Info (Information)

Shows the horizontal and vertical frequencies of the input
signal automatically. The values are approximate.
The type of the input signal is also displayed.

fH: Displays the horizontal frequency.
fV: Displays the vertical frequency.

This manual is related to the following products: