Sony SRX- R110 - Manual (Page 15)

15 GB
Installing the SRX Controller in a Computer for Controlling the Projector
Cha
pt
er 2
P
repa
ra
ti
ons
Do not turn the spanner forcibly when the screw has fully
rotated. Otherwise, the spanner may slip and injure your
hand.
Installing the Projector
This section describes briefly how to install the projector
on the floor. The distance between the center of the lens
and the screen varies depending on the optional lens
attached, the horizontal screen size or the input signal.
For details on installation examples with projection
distances, see “Installation Manual for Dealers.”
Vertical positioning (side view)
Install the projector so that the center of the lens is between
the bottom edge and the top edge of the screen. You can
move the picture position vertically by half of the screen
vertical size using the lens shift adjustment.
Horizontal positioning (top view)
Installing the SRX
Controller in a Computer
for Controlling the
Projector
If you install the supplied SRX Controller in a computer,
you can control the projector from the computer.
System Requirements
The following are required to operate the supplied SRX
Controller.
• Computer: Intel Celeron CPU, 1 GHz or more
– Installed memory: 256 MB or more
– Communication: 10/100BASE-T
– VGA: XGA (1024 × 768) or higher
– HDD: Connected to a computer via the IDE port,
Usable memory with 8 MB or more
– CD-ROM drive: × 8 or faster
• Operating System: Microsoft Windows XP Professional
SP2 (English or Japanese version)
Installing the SRX Controller
1
Insert the supplied installation disc into the CD-ROM
drive of a computer.
The setup.exe in the root folder of the installation disc
starts, and the window for preparing the installation
appears.
Caution
310 mm (12 1 / 4 inches)
Screen
Projection distance
Adjustable range with lens
shift feature
Screen
Center of lens
Screen
Center of lens